Free sample for Geared Dc Motor With Wheel - Robust Brushed DC Motor-D77120 – Retek
Free sample for Geared Dc Motor With Wheel - Robust Brushed DC Motor-D77120 – Retek Detail:
Product Introduction
-Magnets Selection: Ferrite, NdFBe.
-Lamination Thickness Selection: 0.5mm, 1mm.
-Slot Features: Straight Slot, Skewed Slots.
Above key features would affect the motors efficiency and EMI performance, we can custom make based on your application and working condition.
General Specification
● Voltage Range: 12VDC, 24VDC, 130VDC, 162VDC.
● Output Power: 45~250 watts.
● Duty: S1, S2.
● Speed Range: up to 9,000 rpm.
● Operational Temperature: -20°C to +40°C.
● Insulation Grade: Class B, Class F, Class H.
● Bearing Type: durable brand ball bearings.
● Optional shaft material: #45 Steel, Stainless Steel, Cr40.
● Optional housing surface treatment: Powder Coated, Electroplating,Anodizing.
● Housing Type: Air Ventilated, Water Proof IP68.
● EMC/EMI Performance: pass all EMC and EMI testing.
● Certification: CE, ETL, CAS, UL.
Application
MEDICAL ENGINEERING, AUTOMATIZATION, BUILDING AUTOMATION, AGRICULTURE MOTIVE.
Dimension
Parameters
| Model | D76/77 | |||
| Rated voltage | V dc | 12 | 24 | 48 |
| Rated speed | rpm | 3400 | 4000 | 4000 |
| Rated torque | mN.m | 150 | 400 | 700 |
| Current | A | 6.0 | 8.5 | 11 |
| No load speed | rpm | 4000 | 4500 | 4500 |
| No load current | A | 1.2 | 1.0 | 0.4 |
| Motor length | mm | 90 | 110 | 120 |
Typical Curve @130VDC
FAQ
1. What are your prices?
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
2. Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
3. Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4. What is the average lead time?
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5. What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.
Product detail pictures:
Related Product Guide:
We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for Free sample for Geared Dc Motor With Wheel - Robust Brushed DC Motor-D77120 – Retek , The product will supply to all over the world, such as: Sevilla, Algeria, Miami, Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By Jason from Bangkok - 2018.07.27 12:26
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Catherine from Saudi Arabia - 2018.10.31 10:02
