Manufacturer for 5010 Brushless Motor 750kv - High Torque Automotive Electric BLDC Motor-W8680 – Retek

Short Description:

Product Detail

Product Tags

Feedback (2)

With this motto in mind, we have turn out to be amongst probably the most technologically innovative, cost-efficient, and price-competitive manufacturers for Small Electric Fan Motor, Bathroom Extractor Fan Motor Replacement, 22.5 Kw Brushless Motor, We will supply best quality, the most market competitive price, for every new and old customers with the most perfect green services.

Manufacturer for 5010 Brushless Motor 750kv - High Torque Automotive Electric BLDC Motor-W8680 – Retek Detail:

Product Introduction

W86 series product is a compact high efficient brushless DC motor, magnet made by NdFeB(Neodymium Ferrum Boron) and high standard magnets imported from Japan as well as the higher standard stack lamination, which greatly improve the motor performances comparing to others available motors in the market.

Comparing to conventional dc motors, significant advantages as below:
1. Better speed-torque characteristics.
2. Fast dynamic response.
3. No noise in operation.
4. Long service lifespan over 20000hrs.
5. Large speed range.
6. High efficiency.

General Specification

● Typical Voltage: 12VDC, 24VDC, 36VDC, 48VDC, 130VDC.

● Output Power Range: 15~500 watts.

● Duty Cycle: S1, S2.

● Speed Range: 1000rpm to 6,000 rpm.

● Ambient Temperature: -20°C to +40°C.

● Insulation Grade: Class B, Class F, Class H.

● Bearing Type: SKF/NSK ball bearings.

● Shaft material: #45 Steel, Stainless Steel, Cr40.

● Housing surface treatment options: Powder Coated, Painting.

● Housing Selection: Air Ventilated, IP67, IP68.

● EMC/EMI Requirement: According to customer’s demand.

● RoHS Compliant.

● Certification: CE, built by UL standard.

Application

KITCHEN EQUIPMENT, DATA PROCESSING, ENGINE, CLAY TRAP MACHINES, MEDICAL LABORATORY EQUIPMENT, SATELLITE COMMUNICATION, FALL PROTECTION, CRIMPING MACHINES.

application1
fall protection3

Dimension

W86145_dr

Typical Performance

Items	Unit	Model
Items	Unit	W8658	W8670	W8685	W8698	W86125
Number Of Phase	Phase	3
Number of Poles	Poles	8
Rated Voltage	VDC	48
Rated Speed	RPM	3000
Rated Torque	N.m	0.35	0.7	1.05	1.4	2.1
Rated Current	AMPs	3	6.3	9	11.6	18
Rated Power	W	110	220	330	430	660
Peak Torque	N.m	1.1	2.1	3.2	4.15	6.4
Peak Current	AMPs	9	19	27	34	54
Back E.M.F	V/Krpm	13.7	13	13.5	13.6	13.6
Torque Constant	N.m/A	0.13	0.12	0.13	0.14	0.14
Rotor Interia	g.cm²	400	800	1200	1600	2400
Body Length	mm	71	84.5	98	112	139
Weight	kg	1.5	1.9	2.3	2.8	4
Sensor	Honeywell
Insulation Class	B
Degree of Protection	IP30
Storage Temperature	-25~+70℃
Operating Temperature	-15~+50℃
Working Humidity	<85%RH
Working Environment	No direct sunlight, non-corrosive gas,oil mist, no dust
Altitude	<1000m

Typical Curve@48VDC

W86145_dr1

FAQ

1. What are your prices?

Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.

2. Do you have a minimum order quantity?

Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.

3. Can you supply the relevant documentation?

Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

4. What is the average lead time?

For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.

5. What kinds of payment methods do you accept?

You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.

Product detail pictures:

Related Product Guide:

Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of Manufacturer for 5010 Brushless Motor 750kv - High Torque Automotive Electric BLDC Motor-W8680 – Retek , The product will supply to all over the world, such as: Munich, El Salvador, Barcelona, We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality products and good after-sales services. Up to now, our products have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits.

3v Brushless Motor