Robust Suction Pump Motor-D64110WG180
Product Key Features
Normally the standard configuration of the gear motor we adopt steel gears for conventional application such as door opener, window openers and so on, specifically we also choose the brass gears for heavy load application to increase the abrasive resistance.
General Specification
● Voltage Range: 12VDC, 24VDC, 130VDC, 162VDC.
● Output Power: 15~100 watts.
● Duty: S1, S2.
● Speed Range: up to 10,000 rpm.
● Operational Temperature: -20°C to +40°C.
● Insulation Grade: Class B, Class F, Class H.
● Bearing Type: durable brand ball bearings.
● Optional shaft material: #45 Steel, Stainless Steel, Cr40.
● Optional housing surface treatment: Powder Coated, Electroplating,Anodizing.
● Housing Type: Air Ventilated, Water Proof IP68.
● Slot Feature: Skew Slots,Straight Slots.
● EMC/EMI Performance: pass all EMC and EMI testing.
Application
SUCTION PUMP, WINDOW OPENERS, DIAPHRAGM PUMP, VACUUM CLEANER, CLAY TRAP, ELECTRIC VEHICLE, GOLF CART, HOIST, WINCHES.
Dimension
Performance
| Model | D40 Series | |||
| Rated voltage | V dc | 12 | 24 | 48 |
| Rated speed | rpm | 3750 | 3100 | 3400 |
| Rated torque | mN.m | 54 | 57 | 57 |
| Current | A | 2.6 | 1.2 | 0.8 |
| Starting torque | mN.m | 320 | 330 | 360 |
| Starting current | A | 13.2 | 5.68 | 3.97 |
| No load speed | RPM | 4550 | 3800 | 3950 |
| No load current | A | 0.44 | 0.18 | 0.12 |
| De-mag current | A | 24 | 10.5 | 6.3 |
| Rotor inertia | Gcm2 | 110 | 110 | 110 |
| Weight of motor | g | 490 | 490 | 490 |
| Motor length | mm | 80 | 80 | 80 |
Typical Curve @12VDC
FAQ
Our prices are subject to specification depending on technical requirements. We will make offer we clearly understand your working condition and technical requirements.
Yes, we require all international orders to have an ongoing minimum order quantity. Normally 1000PCS, however we also accept the custom made order with smaller quantity with higher expense.
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
For samples, the lead time is about 14 days. For mass production, the lead time is 30~45 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
You can make the payment to our bank account, Western Union or PayPal: 30% deposit in advance, 70% balance before shipment.